Mowing bucket

Mowing bucket MS

[ezcol_1half]

General

Our mowing buckets have a clever design which make them, even with narrow ditches, well-controllable and able to easily follow the trails of the ditches. This design has been applied to all our models and there are different types available.
Our mowing buckets, in combination with the 90° tilting coupler, can be transported safely lengthwise. Depending on the excavator on which the mowing bucket will be mounted, it is possible to make sure that the most distant point of the mowing bucket will not extend more than 3.5 meters before the driving-wheel.

DMK 430

These mowing buckets are also available in 4.35 meter wide versions that are 2.5 meters in their narrow position, which makes them transportable in the width.

Type cutter bar: MS
Working width unfolded: 4.30 meter
Werkbreedte folded: 2.50 meter
Weight including tilting coupler: 530 kg
Suspension: quick coupler Herder

DMK 700

The divisible mowing bucket has a width of 6.25 meters and is foldable to 4.35 meters. It is possible to mow with the narrow setting, and this might be necessary for mowing between drainage or at a curve in the waterway. During transportation, the mow can be folded up and turned lengthwise with help of the 90° tilting coupler, so that the mowing bucket can be transported safely.
Type cutter bar: MS
Working width unfolded: 6,20 meter
Working width folded: 4.30 meter
Weight including tilting coupler: 760 kg
Suspension: cw 20

Transport

To transport wide mowing buckets, the 90° tilting coupler is very useful. Thanks to this tilting coupler, the mowing bucket can be turned lengthwise and transported safely. With a weed-cutting bucket with 90° tilting coupler in combination with a Hobelman-Halle extension stick, it is possible to place the mowing bucket alongside the excavator. The extension and side racks can be folded down, both hydraulically and mechanically. Depending on the excavator, it is possible to make sure that the most distant point of the mowing bucket will not extend more than 3.5 meters before the driving-wheel.

With a mowing bucket with 90° tilting coupler direclty attached at the quick coupler CW20, the mowing bucket can be transported lengthwise. This tilting coupler has a compact construction, so that the distance from the bucket pivot pin to the point of the knife will be small, leading to the advantage of being able to mow easily in smaller waterways with the mowing bucket.

More information?

Download the folder here.[/ezcol_1half]

[ezcol_1half_end]maaikorf_2


[/ezcol_1half_end]